Analog Gas Alert Alarm Specification for Hospital MAP Brand
1. General Requirements:
Purpose: To provide continuous monitoring and alerting of medical gas levels and system status in hospital environments.
Location: To be installed in critical areas such as ICU, surgical suites, and recovery rooms.
2. Dimensions and Design:
Dimensions:
Height: 150 mm
Width: 250 mm
Depth: 50 mm
Design: Wall-mounted with an easy-to-read analog display.
Material: High-impact, flame-retardant MS Casing.
Finish: Smooth finish with antimicrobial Powder coating.
3. Gas Monitoring Capabilities:
Types of Gases Monitored:
Oxygen (O2)
Nitrous Oxide (N2O)
Medical Air
Vacuum (suction)
Carbon Dioxide (CO2)
Sensors: High-accuracy, long-life sensors specific to each gas type.
4. Alarm Specifications:
Visual Alarms:
Individual LED indicators for each gas (Green for normal, Yellow for warning, Red for alarm).
Audible Alarms:
Adjustable alarm volume with a minimum of 85 dB at 1 meter.
Alarm Conditions:
High/low gas pressure.
Sensor failure.
Power failure.
5. Display:
Type: Analog gauges for each gas type with clear, labeled scales.
Range:
Oxygen: 0-100 psi
Nitrous Oxide: 0-100 psi
Medical Air: 0-100 psi
Vacuum: 0-30 inHg
Carbon Dioxide: 0-100 psi
Accuracy: 2% full scale.
6. Electrical Specifications:
Power Supply:
Input Voltage: 110-240V AC, 50/60Hz
12V direct power supply
Power Consumption: 10W
Safety Standards: Compliant with IEC 60601-1 for medical electrical equipment.
7. Environmental Specifications:
Operating Temperature: 0C to 50C
Humidity: 0% to 95% RH, non-condensing
Ingress Protection: IP42
8. Installation and Mounting:
Mounting: Wall-mounted with included hardware.
Connections: Quick-connect fittings for gas lines and secure electrical connections.
Installation: To be installed by certified technicians.
9. Compliance and Safety:
Certifications:
CE marked.
Compliance with ISO 13485:2016 (Medical Gas Pipeline Systems).
Safety Features:
Overpressure protection.
Short-circuit protection.
Surge protection.
10. Maintenance and Calibration:
Maintenance:
User-friendly access for maintenance and sensor replacement.
Regular maintenance checks recommended every 6 months.
Calibration:
Factory calibrated with a recommended recalibration interval of 12 months.
11. Warranty:
Standard Warranty: 1 years for all components